Figure 4. For competitions
(This is only needed for the top cup.)
 
A. Turn the cup so that the flatter part comes up.
 
B. Tighten the nylon nut to get the proper clamping force.
 
C. Loosen the nylon nuts after the competition.
Figure 3. Color-sleeves
 
A. Put the color-sleeves in a bucket with hot water (not needed if you have very strong fingers).
 
B. Bend out one side so it can slide over as on figure 3 C.
 
C. Bend out the other side and press hard.
Figure 2. Installation of cups on wings
 
A. Open the clamp completely and unhook it.
 
B. Thread the cup as on the picture. Pull the cup onto the stand like figure 1.
Figure 1. Installation of cups on single stands
 
Open the clamp but leave it on the hook.
A. Expand the latch arm completely. Keep it with light pressure.
 
B. Then you can pull the cup onto the stand. Make the same maneuver when changing the height.
Tips and advices
SCANEQUIPRO SAS
20, Rue Jean Mermoz
FR - 25 300 Pontarlier
e-mail: info@scanequipro.com
HomeHorse transportsUsed vehiclesRidingplaceSaddle cabinetsDiverseOur conditionsAbout usContact 
THE PROFESSIONAL CHOICE
Mentions légales
ScanEquiPro